Rendering Perth
We repair and repaint rendered walls across Perth — patching cracks, resealing hairline movement joints, and restoring chalky or aged render before applying a fresh, protective top coat. Render failures (cracking, bubbling or flaking) are common on older Perth homes and are usually a sign the surface needs proper preparation, not just a coat of paint over the top.
Because we handle both the render repair and the painting, you get one contractor and one warranty for the finished result. That matters when a hairline crack is really a movement joint that needs flexible sealant, or when chalky render needs consolidating before any colour will stick. Painting over failed render without fixing the substrate is the fastest way to peel and blister within a season.
We work on acrylic render, sand-and-cement, and older lime-based systems on heritage homes around Fremantle, Guildford and the inner suburbs. Heritage work needs breathable systems so moisture can escape; modern acrylic render usually wants a flexible, crack-bridging exterior coating. We assess the substrate before specifying products rather than assuming every rendered wall is the same.
Typical jobs range from localised crack repair and a targeted repaint through to full elevation restorations on multi-storey or complex facades. Quotes always separate repair scope from paint scope so you can see where the money is going — and every finished paint system is covered by our 5-year workmanship guarantee.
Our Process
- 1Inspect and diagnose — we identify crack types, hollow spots, moisture issues and coating failure so the repair plan matches the cause, not just the symptom.
- 2Repair and reseal — cracks are cut out and filled, hollow render is patched, joints are resealed, and the surface is primed or consolidated as needed.
- 3Protective finish — a suitable exterior paint or texture coat goes on once repairs have cured, colour-matched or refreshed to your preference.
- 4Final check — we inspect repaired areas under good light, confirm adhesion and finish quality, and hand over with warranty documentation.
Materials & Paint Systems
Patch materials are matched to the existing render type where practical so repairs don't telegraph as hard spots. Flexible exterior sealants are used at movement joints; rigid fillers are reserved for stable cracks that won't reopen.
Topcoats are chosen for flexibility and weather resistance — elastomeric or high-build acrylics on problem elevations, heritage-appropriate breathable finishes on older lime render. We won't apply a film-forming coating that traps moisture in a substrate that needs to breathe.
What's Included
- Render crack and defect repair
- Resealing and waterproofing
- Full render restorations
- Heritage home render restoration
- Colour-matched or refreshed finishes
- Flexible coatings for movement-prone elevations
- 5-year workmanship guarantee on the finished paintwork
- Single contractor for repair and paint
Common questions about rendering
How much does render repair and painting cost in Perth?
Localised crack repair and a targeted repaint can start in the low thousands; full elevation restorations on multi-storey or complex facades are quoted after inspection because hollow render, moisture and coating failure vary widely. We separate repair scope from paint scope on every quote so you can see where the money is going. Painting over failed render without fixing the substrate is the fastest way to peel within a season — diagnosing the cause first usually saves money overall. Free on-site assessments are available via 0431 445 780 or the form on this page.
Can you repair cracks and repaint render in one job?
Yes — that is the point of combining render repair with painting under one contractor and one warranty. Hairline movement joints need flexible sealant; hollow spots need patching; chalky render may need consolidating before colour will stick. We diagnose crack types and moisture issues first, repair and reseal, then apply a suitable exterior finish once repairs have cured. The finished paint system is covered by our 5-year workmanship guarantee.
Do you work on heritage and lime-based render in Perth?
Yes. We work on acrylic render, sand-and-cement, and older lime-based systems on heritage homes around Fremantle, Guildford and the inner suburbs. Heritage work often needs breathable systems so moisture can escape; modern acrylic render usually wants a flexible, crack-bridging exterior coating. We assess the substrate before specifying products rather than assuming every rendered wall is the same — wrong coatings that trap moisture are a common failure mode on older stock.
Fully Insured
$80M public liability insurance
15+ Years Experience
500+ projects completed across Perth
Quality Guarantee
5-year workmanship warranty
Other Services
Get a free Rendering quote
Tell us about your rendering project — we'll reply within 24 hours with a no-obligation estimate.
Phone
0431 445 780
Call us for immediate assistance
desirepaintingwa@gmail.com
Send us your project details
Location
Osborne Park, Perth WA 6017
Serving all Perth metro areas
Hours
Mon-Fri: 7AM-5PM
Saturday: 8AM-12PM
Prefer to Call?
Speak directly with our team for immediate assistance and expert advice.